|
Part:
Bellcrank - Motor sport
Material:
6082-t6
Operation:
Finish:
Bead blast medium grade |
|
Part:
Rear upright - Motor sport
Material:
6082-t6
Operation:
Finish:
bead blast medium grade |
|
Part:
Front uprights l/r - Motor sport
Material:
6082-t6
Operation:
Finish:
Bead blast medium grade |
|
Part:
Vibration blocks - Aerospace
Material:
stainless steel 316
Operation:
Finish:
natural |
|
Part:
Location pot
Material:
Graphite
Operation:
Finish:
Natural |
|
|
Part:
Drive plate for special purpose assembly machine, 2.5" OD
Material:
Black acetal
Operation:
Machine central bore, machine 2.8mm drive slots, drill & ream
studs in flange
Finish:
Natural
|
|
|
Part:
Locating body plate for aerospace application
Material:
Stainless steel 304 S15, 3.15mm thick
Operation:
Pressed fold, wirecut outside profile, CNC machined all holes,
center holes bored with ±0.01mm tolerance, machined
counter sinks
Finish:
Bead blasted, full debur, packaged in sealed plastic envelope
|
|
|
Part:
Centalising plate for atmospheric probe, aerospace
Material:
Stainless steel 316, 3.15mm thick
Operation:
Pressed profile, holes wire eroded with machined counter
sink to ±0.05mm tolerance
Finish:
Bead blasted and packaged in sealed plastic envelope
|
|
|
Part:
Preparation plate for wire erosion of pendent jewellery for
film prop, one off
Material:
Stainless steel 304, 5mm
Operation:
Bottom spot & drill start holes, mill pendent rebate
to DXF provided by customer
Finish:
Polished
|
|
|
Part:
Isolator shaft adaptor
Material:
Stainless steel 321 10mm2
Operation:
Drill & ream securing pin hole, drill & ream spring
hole, CNC machine down to 8mm2 from 10mm2 stock
material
Finish:
Polished ends, colour natural
|
|
|
Part:
Inspection gauge
Material:
Free issue aluminium casting 70mm2
Operation:
Fully machined all faces, drill & tap securing thread
M8, drill & bore central holes with inline concentricity ±0.02mm
tolerance, securing screw & swivel pad bought out items
Finish:
Hard anodised
|
|
|
Part:
Interlock switch body for electrical switch gear application
Material:
Aluminium HE30, 19mm x 25mm
Operation:
CNC machined holes, counter bores & slots on 3 sides
Finish:
Anodised natural/silver (chromic acid)
|
|
|
Part:
Probe fixing plate for aerospace application
Material:
Stainless steel 316, 3.15mm thick
Operation:
Pressed profile, machine holes, counter bore with ±0.01mm
tolerance on center hole
Finish:
Bore masked & bead blasted, packaged in sealed plastic
envelope
|
|
|
Part:
Lateral location plate for aerospace sensor probe application
Material:
Stainless steel 304, 3.15mm thick
Operation:
Wire cut outside profile, ends formed on press tool, center
hole machined to ±0.01mm tolerance, machined counter
sink
Finish:
Hole masked with bung and bead blasted
|
